How to Reset the Oil Life on a Honda Civic

The oil life resetting problem is pretty common in some of the models of Honda vehicles, and Civic is one of them. It is essential to fix this problem to avoid any future consequences. The oil life indicates when you should get your car serviced or when you should replace the oil. This problem usually occurs after your vehicle has undergone an oil replacement, and it must be reset.

Some studies and reports show that a significant number of accidents happen because of the problem in the car, and that’s why avoiding such minor issues in your car may lead to big trouble.

How to Reset the Oil Life on a Honda Civic( Step-by-step)

Here in this article, you will get to know about how to reset oil life indicators. No matter what Honda Civic model you have, after reading this article, you’ll be able to reset it.

Methods for 2016-2021

If your vehicle’s model is dated between 2016 and 2021, this is what you need to do to reset it.

Models with information display:

If your model has the information display, you need to go for these steps-

  1. Press the “Trip” stem button to toggle the selection to Oil life.
  2. Now, press and hold the “Trip” stem button for good 10 seconds, and once the display begins to blink, release the button.
  3. Finally, press and hold the “Trip” stem for 5 seconds, and you should see the Oil life reset to 100%. This is how you do it.

Models with Driver Info interface

Following are the steps for the models with Driver Information Interface:

  1. Turn the ignition “on” without starting the engine.
  2. Press the “Trip” stem to toggle the selection to wrench.
  3. Press and hold the “Trip” stem button for at least 10 seconds and then release it.
  4. Now, rotate the “Trip” stem for selecting “Oil life.”
  5. Finally, press and hold the “Trip” for 5 seconds and then release it. You’re done.

Models with Display Audio

The steps for models with display audio are straightforward:

  1. Go to the “Settings,” then go to the “Vehicle.”
  2. Now go to the “Maintenance Info.”
  3. Select Reset Items
  4. Now, select the “Engine Oil.” You’re done.

So this was all about how to rest Honda Civic oil light 2016-2021 models.

Methods for 2015 models

Methods to reset the oil life monitor in 2015 models are following:

Models with information display

  1. Press the “Trip” stem button to toggle the selection to Oil life.
  2. Now press and hold the “Trip” stem button for at least 10 seconds, and don’t release it until the display blinks.
  3. In the final step, press and hold the “Trip” stem for 5 seconds. The oil life will reset to 100%.

These steps are similar to the models with an information display that is dated between 2016 and 2021.

Models without Information display

  1. Use the steering wheel button to select the “Menu.”
  2. Select vehicle information.
  3. Now choose “Reset” and select “Yes.” Your oil life should reset.

This is how you can reset the oil life monitor in 2015 models.

Methods for 2012-2014 models

There is only one method to reset the oil life indicator. Here are the steps:

  1. Turn the power “On” without starting the vehicle.
  2. Press “Menu” by using the buttons on the steering wheel, then choose the Vehicle menu.
  3. Select “Vehicle information” using the + button and then press “source.”
  4. Press “Source” again to choose the maintenance info.
  5. Now, press “Source” one more time, and the oil life reset mode would be displayed. Use the minus (-) button to select “Yes” and here it is done.

This method of resetting the oil life is the same for all the models that date between 2021-2014.

Method for 2006-2011

There’s only one method for all the models that are between 2006 and 2011. Here are the steps to be followed:

  1. Turn the power “on”, but don’t start the vehicle.
  2. Press “Select/Reset” until your engine oil life is displayed.
  3. Now press and hold the “Sel/Reset” for 10 seconds, then release the button when you see the codes begin to blink on display.
  4. In the final step, press and hold “Select/Reset” for 5 seconds until the oil life resets to 100%.

Method for 2000-2005 models

The steps are the same for all the models that are between 2000-2005:

  1. Turn off the vehicle.
  2. Press and hold the “Select/Reset” stem button on the instrument panel.
  3. Keep holding the button while turning the ignition to “on”.
  4. Still, keep holding the button for 10 seconds until the oil life indicator is turned off.

Conclusion

So this was all about how to reset the Honda maintenance light on all the models of Honda Civic. Before you follow these steps, make sure you know about the model you’re using and then apply these steps accordingly. It’s essential to resolve this issue so that you’ll not have to face any problems in the future.

Frequently Asked Questions

Following are the frequently asked questions that you might find helpful:

What does oil life mean?

The oil life percentage measures the quality of the engine’s oil. It doesn’t indicate the oil level, so you don’t need to add oil to your engine.

If the oil light is still on after you change the engine oil, you need to check the sensor, because it happens when the sensor malfunctions.

Leave a Comment